Sealing cord oven seal round 08mm with metal wire 1.5m

This gray fireproof sealing cord (glass cord based on E-fiberglass) is wrapped with metal wire. The wire provides more stability and better support.

The areas of application range from the door on the fireplace or tiled stove insert to sealing the lids on coal stoves.

Application temperature up to 550 °C

Fireproof sealing cord diameter: 8 mm

Length: 1.5m

Make sure that the fireproof sealing cord is and remains elastic. Over time, the fire-resistant oven seal may harden. The fireplace door no longer closes flush and your stove draws in the wrong air. This is accompanied by higher combustion temperatures and wear on the interior lining occurs much more quickly. In the worst case, the body itself can warp. Therefore, replace the oven sealing cord in good time.

The reasons for such hardening can be different. Overheating with higher filling quantities than specified in the respective operating instructions, as well as the use of unsuitable and aggressive cleaning agents can lead to a significant shortening of the service life. Protect the sealing cords from moisture or cleaning agents when cleaning. Do not brush or otherwise clean mechanically. Do not allow the bed of ash or embers to rise so high that the sealing cords are exposed to the direct flame.

Our suitable sealing cord adhesive is particularly suitable for gluing the new fireproof sealing cord to the oven body. Clean the surface of old sealing cord residue and glue in advance. This will ensure that the new oven seal is not too bulky and the door is difficult to close. Cut the oven seal to size and then press it into the corresponding adhesive groove. Let it dry for a few hours and you can heat safely and carefree again.

Please note: The sealing cords with wire are somewhat more stable and can therefore be compressed more weakly than a comparable seal without brass wire.